课程群案例嵌入协同教学模式的探索

在课程群的教学中由于每门课程各自独立开展教学,缺乏知识的融合和衔接,导致学生运用综合知识解决问题的能力较弱。在课程群的教学中采用案例嵌入协同教学模式,将完整的工程案例嵌入到课程群各门课程的教学中,协同规划各门课程的教学任务,每门课程再围绕案例展开研究性教学。通过嵌入的工程案例衔接各门课程的知识点,帮助学生建构完整的知识体系,强化工程应用的概念；同时通过研究性教学,培养学生分析问题和解决问题的能力,两部分相结合,提高了学生运用综合知识解决复杂问题的能力。     

Photochromism of photopolymerized novel copolymers having spirooxazine moiety groups

Iranian Polymer Journal - A novel class of photochromic copolymer based on spironaphthoxazine (SO) moieties was smoothly prepared through the copolymerization of methyl methacrylate (MMA), butyl...     

双光束激光焊匙孔动态特征分析

文中研究了高功率单光束激光焊与双光束激光焊过程中匙孔动态特征的差别. 结果表明，单光束激光焊及双光束激光焊接过程中匙孔均处于从产生到湮灭的剧烈波动的过程，不同于单光束激光焊匙孔的形成、长大、维持、缩小、湮灭过程，双光束激光焊的匙孔还存在分离长大及合并缩小的过程；在相同的焊接参数及焊缝具有相同熔深的条件下，双光束激光焊匙孔的波动频率约为单光束激光焊的2/3，单光束激光焊匙孔的开口面积均值约为双光束激光焊匙孔开口面积的1/2，开口面积的波动变异系数约为单光束激光的2倍，即双光束激光焊过程中匙孔较单光束激光焊的具有较高稳定性.     

预压力对压电驱动履带移动系统的性能影响

为了提高夹心式压电驱动移动系统的机械输出性能，提出了一种U型预压力调节机构，并开展了预压力对夹心式压电驱动履带移动系统输出性能影响关系的实验研究。首先，针对U型预压力调节机构的安装对夹心式压电振子的振动特性影响关系开展了有限元仿真分析，发现U型预压力调节机构始终处在夹心式压电振子的两相工作模态振动节点位置；其次，开展了夹心式压电驱动履带移动系统的原理样机的预压力调节测试实验，确定了系统的最大输出牵引力及其所对应的最佳预压力；最后，在最佳预压力工作状态下，开展了原理样机的牵引力特性、越障性能以及模拟月壤环境下的运动特性实验。研究结果表明，在最佳预压力工作状态下，夹心式压电驱动履带移动系统的机械输出性能最佳，为其进一步在月面巡视器上的应用提供了技术支持和试验基础。     

时效工艺对纳米结构2297铝锂合金力学性能与微观组织的影响

采用535 ℃×2 h固溶制度,将热锻态2297铝锂合金固溶水淬后冷轧,冷轧压下量为95%,然后将轧制样品在不同温度(120~190 ℃)和时间(0~80 h)范围内进行时效处理。采用拉伸、扫描电镜(SEM)和透射电镜(TEM)等测试方法,分析时效温度和时间对铝锂合金组织与性能的影响。结果表明:时效前的大塑性变形能获得纳米结构组织,能促进T₁相均匀细小地析出,缩短合金达到峰时效的时间,最终成功制备了高强高塑性铝锂合金。在120~140 ℃温区内时效时,时效温度越高,达到峰时效的时间越短、强度越高。140 ℃达到峰时效时间缩短为40 h,此时合金的抗拉强度、屈服强度和伸长率分别为525 MPa、478 MPa和7.7%,主要强化相为细小的T₁相。在170~190 ℃温区内时效时,时效温度越高,达到峰时效的时间越短,但抗拉强度与屈服强度迅速下降。170 ℃时效8 h达到峰时效状态,此时合金的抗拉强度、屈服强度和伸长率分别是503 MPa、462 MPa和5.0%,主要强化相仍为T₁相,但已经明显粗化。     

长管拖车缠绕气瓶纤维层冲击损伤的数字射线检测

采用缠绕气瓶替代钢制无缝气瓶是长管拖车轻量化的重要手段之一,但对于缠绕气瓶缠绕层因冲击造成的内部损伤,目前仍缺少成熟有效的检测手段。采用数字射线检测方法,针对玻璃纤维缠绕层冲击损伤造成的分层和危害较大的纤维断裂进行了试验研究。试验表明,采用数字射线检测能够有效检测最小深度为0.5 mm模拟纤维环向断裂刻槽和0.25 mm的模拟纤维轴向断裂刻槽;此外,还通过试验验证增加补偿块的方式,能极大地改善缠绕层分层部位的一次切向透照成像质量,进而提高检测效率。     

Automatic sorting of fresh tea leaves using vision-based recognition method

Mechanical tea harvesting using plucking machines is highly efficient, but harvested raw fresh tea leaves (FTLs) are always low quality because they contain a mixture of old leaves and leaf debris. To address this problem, this study developed an automatic sorting machine with a vision-based recognition method to extract high-quality FTLs from plucked raw FTLs. First, the raw FTLs were separated one by one after passing through three sequential conveyor belts with increasing speed, and were then classified into four grades using a vision-based recognition method. Finally, the FTLs were blown by air nozzles into collection boxes according to their specific grade. In the recognition method, the shape-based feature of each FTL is extracted by establishing the FTL's topological structure, and the support vector machine model is used for classification. The experimental results revealed that the vision-based recognition method performed satisfactorily with an accuracy rate of 94% and precision rate of 85%. The sorting success rate and efficiency of the automatic sorting machine were approximately 80% and 15 kg hr⁻¹, respectively. The results indicate that the developed automatic sorting machine can effectively and efficiently sort raw FTLs, which may improve the profitability and promote the automation of tea processing.     

Spiraling elliptic breathers in nonlocal nonlinear media with linear anisotropy

The dynamical properties of spiraling elliptic breathers in nonlocal nonlinear media with linear anisotropy are analytically discussed. Using a two-dimensional asynchronous fractional Fourier transform, the exact analytical solutions of spiraling elliptic breathers are obtained to the nonlocal nonlinear Schrödinger equation with unequal diffraction coefficients in the highly nonlocal limit. It is found that the spiraling elliptic breathers exhibit a kind of molecule-like libration due to the combined effects of the linear anisotropy and the orbital angular momentum. The angular velocity of the spiraling elliptic breathers is discussed, which can be controlled by the linear anisotropy parameter. In the media with linear anisotropy such as uniaxial crystals, the angular velocity of the spiraling elliptic breathers can be controlled by changing the propagation directions of optical beams. Furthermore, the nonlinearity of media is found to enhance the rotation effect of spiraling elliptic breathers.     

含钒废弃物中钒的回收研究现状及展望

金属钒具备一系列优越性质,在许多领域有着广泛的应用。综述了从含钒钢渣、提钒尾渣、失活催化剂以及钒电池失效电解液等含钒废弃物中回收钒的方法,主要阐述了各种方法的原理、优缺点及发展趋势,介绍了回收钒的新工艺并指出提钒工艺的未来发展方向。     

制备金属铪的新进展

金属铪在核能、航天以及军工领域有着得天独厚的优势,国内外对于金属铪的研究正如火如荼的进行。锆铪相伴而生,本文介绍了锆铪的火法和湿法分离,综述了金属热还原法和熔盐电脱氧法制备金属铪通过熔盐电解法、碘化精练法、电子束熔炼法精炼金属铪,就各种方法的优缺点和绿色生产的需求来看,新型熔盐电脱氧法和联合精炼法是值得发展和探究的方向。